您好,欢迎来到试剂信息网! [登录] [免费注册]
试剂信息网
位置:首页 > 产品库 > Fluzoparib
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
Fluzoparib
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
Fluzoparib图片
CAS NO:1358715-18-0
包装与价格:
包装价格(元)
10 mM * 1 mL in DMSO电议
5mg电议
10mg电议
25mg电议
50mg电议
100mg电议
200mg电议
500mg电议

产品名称
氟唑帕利
SHR3162
Fuzuloparib
产品介绍
Fluzoparib (SHR3162) 是一种有效的口服活性PARP1抑制剂(IC50=1.46±0.72 nM),具有优越的抗肿瘤活性。Fluzoparib 选择性地抑制同源重组修复 (HR) 缺陷细胞的增殖,并使 HR 缺陷细胞对细胞毒性药物敏感。Fluzoparib 在体内具有良好的药代动力学特性,可用于癌症研究。
生物活性

Fluzoparib (SHR3162) is a potent and orally activePARP1inhibitor (IC50=1.46±0.72 nM, a cell‐free enzymatic assay) with superior antitumor activity. Fluzoparib selectively inhibits the proliferation of homologous recombination repair (HR)‐deficient cells, and sensitizes both HR‐deficient and HR‐proficient cells to cytotoxic agents. Fluzoparib exhibits good pharmacokinetic propertiesin vivoand can be used for BRCA1/2-mutant relapsed ovariancancerresearch[1].

IC50& Target[1]

PARP-1

1.46±0.72  nM (IC50)

体外研究
(In Vitro)

Fluzoparib (30 μM; 24 hour) increases the levels of γH2AX in a concentration‐dependent manner in both BRCA2‐deficient V‐C8 cells and BRCA1‐deficient MDA‐MB‐436 cells, but not in BRCA‐proficient V‐C8#13‐5 cells[1].
Fluzoparib (10 μM; 24 hour) increases levels of both pCDK1 and cyclin B, indicating activation of the G2/M checkpoint in MDA‐MB‐436 cells[1].
Fluzoparib (10 μM; 72 hour) increases the processing of caspase‐3, ‐8, and ‐9 concentration‐dependently, it induces G2/M arrest and apoptosis in HR‐deficient MDA‐MB‐436 cells cells[1].
Fluzoparib is preferentially efficacious against HR‐deficient cells, such asBRCA1‐deficient (UWB1.289), MDA‐MB‐436,BRCA2‐deficient (V‐C8),BRCA1‐deficientBRCA2‐mutated (MX‐1) andBRCA1 hypermethylated (OVCAR‐8) cells with IC50values of 0.51 μM, 1.57 μM, 0.053 μM, 1.57 μM, and 1.43 μM, respectively. The IC50values for HR‐proficient cells (V‐C8#13‐5 and UWB1.289 BRCA1) are both >10 μM[1].

体内研究
(In Vivo)

Fluzoparib (oral gavage; 0.3, 1, or 3 mg/kg; single dose) exhibits a good pharmacokinetic profile in Female Balb/cA nude mice (5‐6 weeks old) mice bearing MDA‐MB‐436. After a single oral dose, fluzoparib is rapidly absorbed and rapidly cleared from blood at all dose levels; plasma concentrations of fluzoparib quickly reaches maximum within 2 hours. In contrast, concentrations of fluzoparib in tumor remains at high levels even at 24 hours after dosing (57.9 ng/g , 39.3 ng/g, and 85.6 ng/g for doses of 0.3, 1, and 3 mg/kg, respectively)[1].
Fluzoparib (oral gavage; 30 mg/kg; 21 days) apparently inhibits the growth of tumor with an inhibition rate of 59% (day 21) at 30 mg/kg, and it does not cause significant loss of body weight in Nude mice bearing MDA‐MB‐436 (BRCA1‐deficient) model[1].
Fluzoparib (3mg/kg) combines with Cisplatin, Paclitaxel, or Apatinib (oral gavage; BID; 21 days) causes growth inhibition with rates of 61.4%, 55.3%, and 72.8%, respectively.
Fluzoparib, Cisplatin, and Apatinib combination or Fluzoparib, Paclitaxel, and Apatinib combination can cause growth inhibition with rates of 84.9% and 75.6% (day 21), respectively in vivo.
The 2‐drug combination of Fluzoparib with cisplatin and The 3‐drug Fluzoparib, Cisplatin, and Apatinib combination lead to loss of body weight, whereas no apparent toxicity was observed in other combinations[1].

Clinical Trial
分子量

472.40

性状

Solid

Formula

C22H16F4N6O2

CAS 号

1358715-18-0

中文名称

氟唑帕利

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder-20°C3 years
4°C2 years
In solvent-80°C6 months
-20°C1 month
溶解性数据
In Vitro: 

DMSO : 20.83 mg/mL(44.09 mM;ultrasonic and warming and heat to 60℃)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM2.1169 mL10.5843 mL21.1685 mL
5 mM0.4234 mL2.1169 mL4.2337 mL
10 mM0.2117 mL1.0584 mL2.1169 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: ≥ 2.08 mg/mL (4.40 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.40 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90%corn oil

    Solubility: ≥ 2.08 mg/mL (4.40 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.40 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

*以上所有助溶剂都可在本网站选购。