您好,欢迎来到试剂信息网! [登录] [免费注册]
试剂信息网
位置:首页 > 产品库 > Propidium iodide
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
Propidium iodide
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
Propidium iodide图片
CAS NO:25535-16-4
包装与价格:
包装价格(元)
10mg电议
50mg电议
100mg电议
500mg电议
1 g电议
5 g电议

产品名称
碘化丙啶
PI
产品介绍
Propidium Iodide 是可用于细胞染色的红色荧光染料。
生物活性

Propidium Iodide is a red-fluorescent dye that can be used to stain cells.

体外研究
(In Vitro)

Propidium Iodide is a cell-membrane impermeable dye with characteristic excitation maximum at 535 nm and emission maximum at 617 nm which intercalates with nucleic acids with a stoichiometry of one dye per 4-5 base pairs with little sequence preference. Propidium Iodide has evidenced of having no toxic effects on neurons, being today’s most common marker for membrane integrity and cell viability when applied prior to fixation (pre-fixation Propidium Iodide staining method). The pre-fixation staining has been widely used for quantitative assessments of neuronal cell decline in models of acute neurodegeneration, visualized as intensely labeled PI+-pycnotic nuclei of degenerating neurons[1]. Propidium Iodide cannot cross the membrane of live cells, making it useful to measure the percentage of apoptotic cells by flow-cytometric analysis. The flow cytometric data shows an excellent correlation with the results obtained with both electrophoretic and colorimetric methods. This new rapid, simple and reproducible method proves useful for assessing apoptosis of specific cell populations in heterogeneous tissues such as bone marrow, thymus and lymph nodes[2].

分子量

668.39

性状

Solid

Formula

C27H34I2N4

CAS 号

25535-16-4

中文名称

碘化丙啶

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, sealed storage, away from moisture and light

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

溶解性数据
In Vitro: 

DMSO : 100 mg/mL(149.61 mM;Need ultrasonic)

H2O : 3.57 mg/mL(5.34 mM;ultrasonic and warming and heat to 60℃)

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM1.4961 mL7.4807 mL14.9613 mL
5 mM0.2992 mL1.4961 mL2.9923 mL
10 mM0.1496 mL0.7481 mL1.4961 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture and light)。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: ≥ 2.5 mg/mL (3.74 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (3.74 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20%SBE-β-CDin saline)

    Solubility: ≥ 2.5 mg/mL (3.74 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (3.74 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
*以上所有助溶剂都可在本网站选购。
染色示例
  • Description: Propidium Iodide is a cells dye with red fluorescence. Propidium Iodide only can be taken up by cells with impaired membrane integrity, it can be used in cell cycle and cell viability assays.
    Method: For cell nucleus staining.
    1. Cells are washed with PBS, and then incubates cells with Propidium Iodide (15 min).
    2. Fluorescent images are acquired with a confocal laser scanning microscope (Olympus Fluoviewer. 3.1, Japan).
  • Description: Propidium Iodide is a cells dye with red fluorescence. Propidium Iodide only can be taken up by cells with impaired membrane integrity, it can be used in cell cycle, cell viability and necrocytosis assays.
    Method: For cell walls staining.
  • Description: Propidium Iodide is a cells dye with red fluorescence. Propidium Iodide only can be taken up by cells with impaired membrane integrity, it can be used in cell cycle, cell viability and necrocytosis assays.
    Method: For cell staining.
    1. Fix cultured cells with paraformaldehyde (4%; 10 min).
    2. Incubate cells with Propidium Iodide (50 mg/L; 15 min; dark).
    3. Fluorescent images are acquired with a confocal laser scanning microscope.