Talabostat mesylate (Val-boroPro mesylate; PT100 mesylate) is an orally active and nonselectivedipeptidyl peptidaseIV (DPP-IV)inhibitor (IC₅₀< 4 nM;K_i= 0.18 nM) and the first clinical inhibitor of fibroblast activation protein(FAP)(IC₅₀= 560 nM), inhibits DPP8/9 (IC₅₀= 4/11 nM;K_i= 1.5/0.76 nM), quiescent cell proline dipeptidase (QPP) (IC₅₀= 310 nM), DPP2, and some other DASH family enzymes. Antineoplastic and hematopoiesis- stimulating activities^[1][2][3].

IC50:< 4 nM (DPP-IV), 4/11 nM (DPP8/9), 310 nM (QPP), 560 nM (FAP)^[1]
Ki: 0.18 nM (DPP-IV), 1.5/0.76 nM (DPP8/9)^[2]

By cleaving N-terminal Xaa-Pro or Xaa-Ala residues, Talabostat mesylate (Val-boroPro mesylate) inhibits dipeptidyl peptidases, such as FAP, resulting in the stimulation of cytokine and chemokine production and specific T-cell immunity and T-cell dependent activity^[3].
Talabostat mesylate (Val-boroPro mesylate) competitively inhibits the dipeptidyl peptidase (DPP) activity of FAP and CD26/DPP-IV, and there is a high-affinity interaction with the catalytic site^[4].

Talabostat mesylate (Val-boroPro mesylate) can stimulate immune responses against tumors involving both the innate and adaptive branches of the immune system.
In WEHI 164 fibrosarcoma and EL4 and A20/2J lymphoma models, Talabostat mesylate (Val-boroPro mesylate) causes regression and rejection of tumors. The antitumor effect appears to involve tumor-specific CTL and protective immunological memory.
Talabostat mesylate (Val-boroPro mesylate) treatment of WEHI 164-inoculated mice increases mRNA expression of cytokines and chemokines known to promote T-cell priming and chemoattraction of T cells and innate effector cells^[4].

310.18

Solid

C₁₀H₂₃BN₂O₆S

150080-09-4

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

H₂O : 250 mg/mL(805.98 mM;Need ultrasonic)

DMSO : ≥ 40 mg/mL(128.96 mM)

*"≥" means soluble, but saturation unknown.

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： PBS

  Solubility: 100 mg/mL (322.39 mM); Clear solution; Need ultrasonic
• 2.

  请依序添加每种溶剂： Saline

  Solubility: 50 mg/mL (161.20 mM); Clear solution; Need ultrasonic
• 3.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (8.06 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (8.06 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 4.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (8.06 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (8.06 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 5.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.5 mg/mL (8.06 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (8.06 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。