Ixazomib (MLN2238) is a selective, potent, and reversibleproteasomeinhibitor, which inhibits the chymotrypsin-like proteolytic (β5) site of the 20Sproteasomewith anIC₅₀of 3.4 nM (K_iof 0.93 nM).

IC50: 3.4 nM (20S proteasome)^[1]
Ki: 0.93 nM (20S proteasome)^[1]

Ixazomib (MLN2238) is an N-capped dipeptidyl leucine boronic acid and preferentially bound to and inhibited the chymotrypsin-like proteolytic (β5) site of the 20S proteasome with an IC₅₀value of 3.4 nM (K_iof 0.93 nM). At higher concentrations, Ixazomib (MLN2238) also inhibits the caspase-like (β1) and trypsin-like (β2) proteolytic sites (IC₅₀of 31 and 3,500 nM, respectively). Cell viability studies are performed in a variety of mammalian cell lines to compare the in vitro antiproliferative effects of Ixazomib (MLN2238) with Bortezomib. Studies performed with A375 (lung), H460 (lung), HCT-116 (colon), and HT-29 (colon) cells revealed similar LD₅₀values for the two compounds, which range from 4 to 58 nM^[1].

Ixazomib (MLN2238) shows antitumor activity in the CWR22 xenograft model. The antitumor effects of Ixazomib (MLN2238) dosed at 14 mg/kg i.v. or 7 mg/kg i.v. are compared with Bortezomib dosed at 0.8 mg/kg i.v. or 0.4 mg/kg i.v. on a twice weekly regimen. The high dose for both Ixazomib (MLN2238) and Bortezomib shows similar antitumor activity in this model (T/C=0.36 and 0.44, respectively). However, Ixazomib (MLN2238) (7 mg/kg) shows greater efficacy at a 0.5 MTD dose compared with a 0.5 MTD dose of Bortezomib (0.4 mg/kg; T/C=0.49 compared with T/C=0.79, respectively) Ixazomib (MLN2238) shows time-dependent reversible proteasome inhibition; however, the proteasome dissociation half-life (t_1/2) for Ixazomib (MLN2238) is determined to be 18 minutes^[1].

361.03

Solid

C₁₄H₁₉BCl₂N₂O₄

1072833-77-2

艾沙佐米

Room temperature in continental US; may vary elsewhere.

DMSO : 62.5 mg/mL(173.12 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.76 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.76 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.08 mg/mL (5.76 mM); Clear solution

  此方案可获得 ≥ 2.08 mg/mL (5.76 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。