Desisobutyryl-ciclesonide is the active metabolite of Ciclesonide. Desisobutyryl-ciclesonide has affinity for theglucocorticoid receptor.

Glucocorticoid receptor^[1]

Ciclesonide, an inhaled corticosteroid with almost no affinity for the glucocorticoid receptor, is highly effective in downregulating in vitro pro-inflammatory activities of airway parenchymal cells when converted into the active metabolite Desisobutyryl-ciclesonide. Peripheral blood mononuclear cell proliferation toC. albicansis dose-dependently inhibited by 0.3-3.0 μM Ciclesonide and Desisobutyryl-ciclesonide but inhibition by Desisobutyryl-ciclesonide is higher. A significant proliferation toPhlP5is observed only in cultures from atopic subjects: an effective downregulation is already detected at 0.03 μM Ciclesonide and 0.003 μM Desisobutyryl-ciclesonide (complete inhibition at 3 μM Ciclesonide and 0.03 μM Desisobutyryl-ciclesonide). 3 μM Ciclesonide and Desisobutyryl-ciclesonide reduce thePhlP5-specific T-cell blast proliferation and interleukin 4-producing cell proportion. In PBMCs cultures from atopic patients, both Ciclesonide (CIC) and Desisobutyryl-ciclesonide (des-CIC) induce a dose-dependent downregulation ofPhlP5-induced proliferation. The effect is already significantat 0.03 μM Ciclesonide and at 0.003 μM Desisobutyryl-ciclesonide (p<0.001, each comparison),with an early complete inhibition observed at 3μM Ciclesonide and at 0.03 μM Desisobutyryl-ciclesonide. The inhibitory activity towardPhlP5-induced PBMC proliferation is higher for Desisobutyryl-ciclesonide than for Ciclesonide at 0.003 μM (p<0.05), 0.03 μM (p<0.001) and 0.3 μM (p<0.05)^[1].

470.60

Solid

C₂₈H₃₈O₆

161115-59-9

Room temperature in continental US; may vary elsewhere.

DMSO : 100 mg/mL(212.49 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (5.31 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (5.31 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (5.31 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (5.31 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明