您好,欢迎来到试剂信息网! [登录] [免费注册]
试剂信息网
位置:首页 > 产品库 > Nifuroxazide
立即咨询
咨询类型:
     
*姓名:
*电话:
*单位:
Email:
*留言内容:
请详细说明您的需求。
*验证码:
 
Nifuroxazide
本产品不向个人销售,仅用作科学研究,不用于任何人体实验及非科研性质的动物实验。
Nifuroxazide图片
CAS NO:965-52-6
包装与价格:
包装价格(元)
10 mM * 1 mL in DMSO电议
200mg电议
500mg电议
1 g电议
5 g电议

产品名称
硝呋齐特
产品介绍
Nifuroxazide 是STAT3的有效抑制剂,且具有抗癌和抗转移活性。
生物活性

Nifuroxazide is an effective inhibitor ofSTAT3, also exerts potent anti-tumor and anti-metastasis activity.

IC50& Target

STAT3

 

体外研究
(In Vitro)

When U266 cells are incubated with Nifuroxazide, a significant dose-dependent decrease in STAT3 tyrosine phosphorylation is observed. This inhibition of STAT3 tyrosine phosphorylation is rapid, occurring as early as 1 h after treatment, and is sustained for at least 24 h. Treatment of U266 or INA6 cells with Nifuroxazide for 48 hours result in a dose-dependent loss of cell viability with an EC50of approximately 4.5 μM in both cell types. Notably, the MM cells lacking constitutive STAT3 activation show little toxicity to Nifuroxazide[1].

体内研究
(In Vivo)

Compared with the vehicle group, treatment with Nifuroxazide could inhibit tumor growth and tumor weight in a dose-dependent manner, with the inhibition rate of tumor volumes being 43.0% and 62.1% at 25 mg/kg and 50 mg/kg, respectively. It is also shown that Nifuroxazide significantly inhibits the proliferation of nuclear Ki-67-positive cells and induces apoptosis cells of cleaved caspase-3-positive cells. Besides, it is found that treatment with Nifuroxazide could inhibit the expression of MMP-2, MMP-9 and p-Stat3 in A375 tumor tissues. What’s more, Nifuroxazide inhibits the infiltration of MDSCs into the lung, which might be associated with suppression of distant colonization of tumor cells in B16-F10 melanoma metastasis model[2].

分子量

275.22

性状

Solid

Formula

C12H9N3O5

CAS 号

965-52-6

中文名称

硝呋齐特;硝呋酚酰肼

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder-20°C3 years
4°C2 years
In solvent-80°C6 months
-20°C1 month
溶解性数据
In Vitro: 

DMSO : ≥ 155 mg/mL(563.19 mM)

*"≥" means soluble, but saturation unknown.

配制储备液
浓度溶剂体积质量1 mg5 mg10 mg
1 mM3.6335 mL18.1673 mL36.3346 mL
5 mM0.7267 mL3.6335 mL7.2669 mL
10 mM0.3633 mL1.8167 mL3.6335 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40%PEG300   5%Tween-80   45% saline

    Solubility: ≥ 2.58 mg/mL (9.37 mM); Suspended solution

    此方案可获得 ≥ 2.58 mg/mL (9.37 mM,饱和度未知) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH2O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90%corn oil

    Solubility: ≥ 2.58 mg/mL (9.37 mM); Suspended solution

    此方案可获得 ≥ 2.58 mg/mL (9.37 mM,饱和度未知) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 25.8 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

*以上所有助溶剂都可在本网站选购。